stolen recovered jinlun texan 125 wiring help?

Hi Guys, I am new here so forgive me if this is not in the correct area, I have recently bought a jl-125 texan on a 08 reg from a local salvage yard as stolen recovered, It litterally only needs a ignition lock so i ordered it new and then came to fit it and found the wiring colours of the new ignition switch is different to the bike, Im really struggling with this so any help would be greatly appreciated, The wiring left at the ignition lock area is two white plugs with the following colours(7 wires total),
plug 1 has 3 wires (green) (brown) (black),
plug 2 has (brown) (green) (black) (blue with yellow tracer).

the new ign lock has only 6 wires (red) (black with white tracer) (green)(black) (brown) (brown with white tracer)

I have looked at lots of wiring diagrams but still have no idea what to do, I am technically minded and can understand a wiring diagram, The only way I can see forward with this is to trace all wires in the diagram to work it out the new configuration, I hope someone has done t before and have kept a note to save me considerable work, Thankyou all so much in advance and look forward to riding this beauty, regards mark