Hi, I have the power light on but none of the programmes can be selected when programme select button is pressed. Any ideas? Its an integrated Baumatic and there does no appear to be any leakage.
I replaced the door catch and got this problem. Found it was due to a faulty switch in the door catch and swapped it with the one from the old catch.
Might be useful to explain how to get at the switch on the built-in dishwasher:
First take off the front cover panel. To do this you need a magnetised star screwdriver. Undo the two screws recessed into the inside of the door carefully ensuring you keep them attached to the screwdriver. Lift off the front panel.
Now detach only the control panel by unscrewing just the top screws from the inside of the door.
Nigel
January 2010
figured it out, There is a switch in inside the door at the top that was clogged at not releasing. Only about big enough to get a pencil in but cleaned it and clicked off and programmes worked again
A
January 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.