Recent: Fix food processor motor?

Mend Motorcycles

Mend Vehicles, Motorcycles
Find out how to mend it for free.

Ask Question
Mend Vehicles, Motorcycles
Click here to mend motorcycles

Mend > Motorcycles

Mend Broken Hello Cut

HELPPPPPP BROKEN MOPED!!!!!?

Hello, i have a Baotian BT49QT-9 semi derestricted moped. To derestrict it i cut the pink throttle wire in the CDI unit, and altered the needle in the carb - i didnt alter anything to do with the exhaust - i derestricted it about 3 months ago. Recently ive been having problems with the ped. The bike will start fine when on main centre stand and will tick over nicely. However, when i push the bike off the stand it will cough and splutter and cut out. The bike is fine when going flat out down a road but is a neusance as when i come to traffic lights or junctions, as soon as i slow right down, the coughing and spluttering will kick in and will cut out. Another thing i noticed is the bike wont start when off the main centre stand - it will try to but wont and sometimes it makes a noise as if the belt is getting stuck. I dont know alot about bikes so help is appreciated :)

Ash
December 2009
i had this problem with mine and mines fully de restricted all i did was got a new HT cable and it was fine

macauley
May 2012
Hi, couldnt be bothered with it in the end. Sent it into a mechanic, turns out thatit was the HT lead running to the spark plug was split and it was fine when on the stand but when off the stand the cable was beig bent causing a faulty connection and leading the bike to cut out - £38 for new HT lead to be fitted including labour and also including collection off the bike so not bad really. Thanks for your help though.

Ash
December 2009
sounds like the air pipe to the carb or to the air filter feed is being bent and either it has a split in it or its crimping and choking the air flow to the air filter when the engine to frame position is changed .or it could be a wire that is being pulled apart when the position is changed.sounds odd i would check the air filter first though,try taking the seat bucked out and seeing what happens when you take it off the main stand see if any pipe angles change.let me know

adam bike doctor
December 2009
Hi tom thanks for replying. No cut off switch on centre stand. There is one on the side stand which i disconnected but the problem is still there.

Ash
December 2009
start looking for a switch attached to the centre stand/side stand if fitted.bad contacts here will cause running issues

Tom
December 2009
Mend Vehicles, Motorcycles
Click here to mend motorcycles

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vehicles, Motorcycles
Click here to mend motorcycles