Washing machine makes accessive noise in while spining?

Bearings rarely fail in LG washers.

A strong possibility would be a failing Hall Effect Sensor. If the washer *growls* during spin this is usually the Hall Sensor.

If a *clicking* sound is occurring--this may be debris in the tub scraping against the spin basket. This usually requires a major tear-down of the tub assembly to gain access into the tub. Although this is fairly rare---it is usually a bra-wire or a nail.

NOTE:

A *faint* clicking sound when the tub is turned by hand (slowly) is NORMAL.

John/USA
December 2009

hi sardar, when the m/c is off open the door & put your hand on the top stainless steel drum & see if there's any movement if there's any at all it mean's the bearings are on there way out,the bearings are very reasonable in price any where from £10-50 but a very big job to change.hope this help's.

steray
December 2009