Had work done a while back which required the front cover to be removed. Problem is the 2 knobs which operate the water temp and setting have not been replaced properly.
How are these removed and refitted to correctly line up with the numbers?
firstly ensure the power is off.
Then on the outer casing there is a screw top and bottom. remove these and pull the front cover off.
you can now align the knobs to where they need to be and then refit the cover.
If it helps: Before you remove the cover turn the bottom knob to minimum and the top knob to off and this will make it more straightforward to align them.
Hope this helps.
Paul
Paul
December 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.