F&P GW509AU Fault Codes?

Can you confirm that the error light is the 2nd one from left while looking from the front of machine. If so then that is error code 64. The binary numbers are read right to left. 128-64-32-16-8-4-2-1(spin)
Error code 64 is an error with the pressure sensor on the control pcb. It is giving incorrect vaues to the controller. You will not be able to repair the sensor. It means having to change the whole controller. If you plan to use parts off the old machine you must check that the parts are compatible. Post the old machine model number back here & I will let you know if you can use the part.

Lincoln Appliance NZ
November 2009