In the manual it says no pressure rise was detected on turning on the pump - water pressure sensor and or pump defective, air in heating system, quick bleeder defective, too little water in appliance, check adjustable by-pass, connect external expension vessel to return.
Ensure you have at least 1 bar pressure in system via guage or button, if not add some water via the linked water tap and pipe. Also bleed your radiators to ensure no air in system.
hope helps
helpful
January 2010
hi done one today, fault f75, renewed pressure switch and pump, all working fine now.
ng plumbing and heating
November 2009
has the pressure dropped on the gauge on the front of the boiler
b
November 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.