Recent: Replacement battery cover?

Mend > Grass Trimmers

Mend Homelite High Low Idle

high and low idle?

how do I adjust the high and low idle on homelite hedgetrimmer carb

leon
October 2009
well i would start by screwing both screws in LIGHTLY untill the stop (clockwise) then you should have H,L stamped next to them,or under... anyway turn both screws out only 1 and 1/2 turns..it should start there, and your L screw is for idle mixture. and H screw is for High revs mixture,pr full throttle..you can play with either,untill you can hear it revs smoothly .. hope that helps. ;o)

Seagull Geelong
October 2009

Automatic Answer

We may have found other answers which could help you.

Click here for High Low Idle
Mend How to mend it?
3

2004 Ford Focus ZX5 2.3l?

I have a 2004 Ford Focus ZX5 2.3 L. 51,000 I have an intermittent issue with a P0171 code. Start up sta... [Read more]
Mend 2008 help engine
4

2008 trafic 115dci?

help needed please, took van for engine service before a planned holiday After an engine service oil, oil filt... [Read more]
Mend idle rev low
1

shogun uneven tickover?

i have a 93 lwb shogun when it starts idle will rev high and low between 1000 and 2000 revs this only happens ... [Read more]
Mend How to mend it?
1

Can youtell me the starting points for idle mixture,high &low screws on a h?

I need the starting turn out points for my husqvarna 136 carburetor idle mixture, high & low screws?
Mend kawasaki spark plug
1

kawasaki klf 400 idle misfire?

My klf misfires at low revs and runs normally at mid to high revs. I've cleaned the carb and checked the conne... [Read more]
Mend How to mend it?
1

carbuerator settings?

I have a 32cc mcCulloch chain saw and need to know the high main needle valve setting and the low idle needle ... [Read more]
Mend set high speed
1

How do i set the idle,low and high speed jets?

My trimmer is a 1977 weedwacker from Sears. It is 26cc and seems to be starving for gas. I changed the setting... [Read more]
Mend chainsaw carburetor fuel filter
3

Can't get Craftsman Chainsaw(42cc C944.418460) to idle?

My chainsaw was getting very hard to strart. I pulled the carb off and cleaned everything. I have not yet c... [Read more]
Mend cuts high fine
1

My ttr yamaha1987 dirt bike cuts out at high Rpm but idles fine what is it?

My 1987 yamaha ttr225 runs fine at idle and low rpm when ridden but when you try to rev it up the bike wants t... [Read more]
Mend How to mend it?
1

my bolen 31 cc revs too high when idling?

my bolen 31 cc weedeater runs too high when just sitting there idling...what are the right turns on both the l... [Read more]
Mend How to mend it?
2

McCulloch Pro Mac 610 high/low/idle?

What is the purpose and proper use of these adjusters?
Mend How to mend it?
2

how can I fix my chinese import scooter, Benzhou - Yiying 125t?

I bought a chinese import scooter last april, the make is Benzhou and the model is a Yiying secutor 125t. The ... [Read more]
Mend turns help high low
1

what are the adjustments (turns) on the carb. homelite 240 10629?

I have a homelite 240... 10629... and I need to adjust the carb. can you help me? There is a (high) and (low) ... [Read more]
Mend ford diesel 1999
4

Intermittent power loss, Ford Transit Diesel?

My 1999 Transit 2.5 DI is suffering an intermitent power loss. It seems to be caused by air getting into the f... [Read more]
Mend How to mend it?
2

Homelite XL2 carburetor question Thank You!!?

Does anyone know if there are supposed to be 3 adjustment screws on a XL2 automatic? (a low,high, and idle) My... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Grass Trimmers ...