i have a siemens dishwasher. it was working fine ntil yesterday. last night i turned it on and today morning the wash was not complete and its making a noicc when turn it on. normally when you open the door while wash is on, the machine stops. However now when I press the switch it makes the noice before i close the door.
Got an F displayed. If cleaned the items but the there was some water remaining. An engineer came out, broke the plastic cage behind the button panel with his screw driver, put it on, left and my kitchen flooded.
Mary
February 2010
the rotery arm onthe underside of the top shelf has come off and there's no obvious reason why, dishwasher was not loaded to high on the bottom and I cannot just push fix it back into place - is this repairable or is is too expensive - may as well get a new one territory??
JR
November 2009
have a siemens sn23. working no problem. however, thought it had finished a cycle - opened the front - saw water at the bottom - shut the front again - switched back on to continue the cycle - but the water has remained. Tried different cycles - no joy in getting rid of the water. It is draining - but not all the water
brian greenyer
November 2009
Raj, it's a bit unclear what you are trying to explain here.
1: it is not adviseable to open the door while the dishwasher is in the middle of doing something.
2: trying to fill in the blanks in your post it sounds like you could have a leak that has activated the flood protection device.
Mike
October 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.