Recent: Fix food processor motor?

Mend Tevion Computer Hardware

Mend Computers, Computer Hardware
Find out how to mend it for free.

Ask Question
Mend Computers, Computer Hardware
Free repair help for Tevion computer hardware

Mend > Computer Hardware

Mend Tevion Installed Top Box

how to fix my tevion free to air satellite kit?

installed the above product , but when using the set top box getting 65 to 75% signal strenght but o% quality. replaced LNB but still o% quality. any tips on how to fix this. the model number is 28216ald

poffin carlow
October 2009
The key thing is to find ANY satellite by tilting backwards. Just get anything with a strong signal. This will make sure you are pointing to the ring of satellites.

Lock off the up an down movement and then move side to side you should see each satellite come in turn until you find the one you want using the satellite set up menu.

To get the best quality needs VERY small movements,

John from Monaco
December 2013
Had the same trouble to start then found out dish angle not correct, lean the dish back from vertical 2-3 degrees makes a lot of difference. can also by a sat signal strength meter for about £10-£15. signal direction can be found on dishpointer.com - google map pinponts your house and which direction satellites are in relation to you. I'm 65 if I can do it anybody can.

george mitchell - Morley west Yorkshire
June 2012
My kit came complete with a satellite finder, but that was pretty useless. Then someone told me that doing it with that satellite finder was like looking for a needle in a haystack and that what I needed was a serious piece of kit the likes of which professional aerial installers use (and of course at high cost). I'm so disillusioned I'm thinking either of getting a Sky dish, which I've avoided as I only want the Freesat channels, or a high gain digital aerial which may have the advantage of being able to connect it up to my two other TVs without the need for set top boxes on the other two. Can someone please reassure me that it wasn't money straight down the drain? Thanks.

Neville
January 2011
I bought one of those and its the best deal I've had yet.
Were some problems getting going though, mainly because the box was not set to default on purchace.
So first fight your way thro' the setup and set to "default" when you find it.
This will set up to the correct transponder.
Then adjust aerial slightly in the correct direction according to compass and you will see the quality signal when you have found the correct transponder.
Adjust elevation and directions in very gradual amounts until the best quality signal is achieved.
Finally twist the LNB(clockwise?) to get best Q.
Then its done.
I achieved 70% Q.
Tony.

1941Tony
November 2010
haveing the same problem in norfolk uk 0% qaulity, used the sat finder moved the dish but nothing.

steve
August 2010
Hi i'm having the extact same problem, tried every angle going still nothing :-( seems like a big waste of money and time spent on the roof.

Steve Heyes
June 2010
It sounds as though your dish is not aligned to the sattelite correctly. Go to Philex technical site to find out how to do this.

Dave
November 2009
Sounds like dish alignment to me. Use a cheap sat finder to fix it. (Those kits usually come with one.)

T
October 2009

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Installed Top Box

Mend Computers, Computer Hardware
Free repair help for Tevion computer hardware

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Computers, Computer Hardware
Free repair help for Tevion computer hardware