HJA 8630 over fill?

Are the filter groups blocked? They are in the base under the lower spray arm. There are three filters; Main filter, Coarse filter and Micro filter. First remove the Coarse and Micro filter assembly by turning the Coarse filter anticlockwise and lift up. Then press the two tongues inwards and pull out the Coarse filter from the Micro filter. Next remove the Main filter mat by lifting up from the front. Clean all filters with a brush under a running tap. Note that when putting the Coarse filter back into the Micro filter the marks must align. Refit the Main filter mat then refit the Coarse/Micro filter assembly by turning clockwise until you hear a click.

Ced.
December 2009