Recent: Safely remove screen protector from a Macbook Air?

Mend > Sewing Machines

Mend Singer 185K Control Day Heat

Singer 185K foot control set up?

My singer 185K was heard buzzing one day, the heat from the foot control had burnt the carpet. I have taken the control in bits and found a loose nut on the operating arm. Are there any clearances or settings I need to observe when rebuilding?

Danny
October 2009
when you plug the 185k into socket it starts up immenitley is there something wrong with the foot controller and where would you get a foot controller

victor
February 2010
Hello Danny,
I take it you have the original button type foot control, take the suppressor out whilst you are about it that is the small thing connected to the two terminals, you don't need it, adjust the screw on the contacts slightly if you need to, if it is buzzing just loosen it off slightly.
Ken

drivewithken
October 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Control Day Heat

Related Questions ...

Mend boiler central heating gas boiler
1

my mains 24e baxi potteron make will not light up?

i have mains 24e gas boiler 2 weeks ago i found that hot was not as hot as normally it gives .i called the en... [Read more]
Mend keep flashing flashes
1

28i jun condensing combi keep flashing slow flashes ?

went to fix the 28 i jun cond/combi blue light flashes slow ones, replaced heat control , two over heat stat ... [Read more]
Mend heating central heating thermostat
1

Hot Water but no CH Potterton Netaheat Profile 30e-80e?

In the last day or so we have noticed that we are getting hot water but no Central Heating (rads are cold etc.... [Read more]
Mend boiler combination boiler worcester
6

Eco button turns itself on - Worcester 25Si?

Combination boiler works well and has been serviced annually for the 3 years of it's life. Now the ECO button ... [Read more]
Mend heating pressure leaking
1

Problem with leaking water from ravenheat RSF 100E? HELP??

I have a Raven heat RSF 100E, approx 6 years old was brand new when we moved in. Have had problems with from d... [Read more]
Mend boiler central heating radiators
4

Ghost heating?

Potterton neata heat 16-22 Mark 2 F about 18 yrs old but still going strong serviced every year. Problem ... [Read more]
Mend boiler heating leak
2

Glowworm 30ci leaking?

A couple of days ago, I noticed that the heating was off. I used the internal control to fire it up, but there... [Read more]
Mend boiler pcb flame
1

Potterton Suprima 50 cuts out soon after ignition of main flame?

I fixed the 'lock-out' problem last year by resoldering all the suspect joints on the PCB. After working OK f... [Read more]
Mend storage heater night storage heating
6

how do I work my creda 79161 storage heater?

How do I work the creda 79161 night storage heater correctly? don't understand what the room temperature and ... [Read more]
Mend heating pressed central
5

Vulcan Powerhouse heating DSI light shows & heat stops until pressed, why?

Vulcan Powerhouse programmable central ducted gas heating heating system. The DSI light shows on the wall mo... [Read more]
Mend boiler radiators heating controls
4

central heating valve?

can any one help ,updated heating controls for seperate control of heat/water there is a isolating valve on a ... [Read more]
Mend storage heaters control
1

How do Dimplex storage heaters work?

I have moved into a house with Dimplex storage heaters. I am a little confused as how they work? I can get hea... [Read more]
Mend boiler central heating gas flame
4

My CH boiler keeps blowing out when its windy outside!?

Hi, I hope someone can help me with this one. I have an old Baxi Wm 381 RS CH boiler in a house we just moved ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Sewing Machines ...