I have the same problem with my NH tn75a. The tractor seems to lose drive in either direction. It seems like it jumps out of gear or a switch or silenoid is bad to make the clutch pack disengage. Error code reads 47. Any insight would be appreciated.
Eric
September 2010
if you look behind the l.h. panel there are two adjustment screws adjust it clean the contacts and if it dosent work you need a new one,but those things are like cars you have to clear the code if you dont clear code you will still get error
chris pittman
August 2010
Transmission error code F47 "clutch disconnect misadjusted to high" Check clutch switch adjustment located behind the left-hand side dash panel. Using service mode H.A. and check clutch pedal potentiometer travels fully from 0-99. Is the transmission is jumping out or losing drive?
Ash
November 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
