take of tyre then undo the drop link then undo the nuts that hold the shocker on get a heavy bar on the bottom of the drive shaft put weight on it and chap with a hammer to separate the bottom drive shaft undo the nuts under the bonnet should be 3 or 4 nuts takes the full shocker off with the top mount bush attached clamp the shocker spring with the PROPER CLAMP TO SHRINK THE SPRING remove to strut mount bush replace with the new one when putting back together make sure the spring is housed in the metal housing properly wonce complete reverse the fitting proccess if in dout you can contact me on 01506652861.BE CARFULL WITH THE SPRING IF IT IS NOT CLAMPED PROPER IT COULD BE FATAL IF CLAMPES NOT SECURE.good luck its easy
george nixon
September 2009