Stopped Staiger radio controlled clock ?

Put the clock by a window for a while to pick up the wireless signal. It could still take a couple of hours though, in my experience.

Alan
May 2021

My Steiger Space Timer keeps the time but the second hand remains static in the one o'clock position. Yet on changing the battery it will whizz round until the both the hour and minute hand reach the 12 o' clock position; then once the timing signal is being received the 2nd hand then advances 5 seconds and then halts.

Patrick
October 2014

my clock battery needed changing when i changed the battery the clock stopped, after afew attempts the hands move and come to a stop

z. qurreshi
March 2012

My problem with the clock was 1, not finding the signal. 2, running 4hours slow.
After changing batteries etc. the clock would not find signal again and continually searched. My final act before throwing the clock away was to tighten the battery connections! Low and behold the clock settled down and found the signal and has been working for the last week. 12.10.2010

Tony E.
October 2010

Can somebody please tell me how to turn the alarm on/off??? Tearing my hair out.

CTZNX
June 2010

Anne, just to let you know that my clock has started working again. After giving up on it I left it for 24 hrs re inserted the battery and lo it is now working perfectly.
I'm guessing there may have been a problem with the radio signal.

Hope yours now works

Tony
September 2009

You're not alone. The same thing has happened to mine. So I hope we get an answer

Tony
September 2009