Creda T622CW tumble dryer cuts out after 10 mins?

Dear pundits,

My Creda T622CW tumble dryer cuts out after a few minutes. It starts again fine but keeps cutting out. There are no strange noises coming from it.

So far I have:

* Taken the panels off and given it a good clean through to remove all lint etc.

* Removed the earth strip cover and removed a lot of carbon deposit with a soft wire brush.

* Removed the condenser and cleaned the housing.

* Poked a lot of lint from the condenser with a thin plastic strip, then rinsed the condenser through with water.

I'm now waiting for the condenser to dry a little before trying the dryer again.

Is there anything else I can do if this doesn;t work?

Thanks in advance,
Andrew

Andrew Norris
August 2009