foot pedal not working on a Cresta sewing machine?
I have mains fed in and the light on the machine works. If i bridge the terminals then the motor fires up but there is no feed from the pedal through to the motor.
Is there a common fault I should look for? My test meter has broke so I can't test the resistor etc.
I have had a look and there seems to be what look like two old inline resistors (small plastic covered windings of wire) they both look burned out there is no current crossing them what so ever?
can these be found to replace them or will it indeed be a case of replacing the whole foot control?
BTW You are correct it is the sew-tric motor
martin
July 2009
Hello Martin,
the only Cresta model I know goes back many years and has a sew-tric motor and control, if that is the case then you will ned a new foot control.
Ken
drivewithken
July 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix sewing machines.