No heat so I have the choice of hear or thermal cut off or exaust
1/ How can I check the heater I have a fluke meter so can read resistance etc?
2/ Should both cut outs be normally closed when I buzz them out?
all 3 stats on this should be closed circuit when cold and heater is in 2 parts.2 pins are linked together and the other 2 are the respective elements.34ohms seems to ring a bell but anything around this area is a good element
ck
July 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
