UK PANASONIC VCR NV-F65HQ HAS NO POWER?

CHEERS SPARKY, I WILL TRY THAT. SORRY I MADE A MISTAKE ON THE MODEL, IT IS NV-F65B, THE HQ IS PART OF THE MODEL NO ON THE FRONT PANEL, THANKS AGAIN FOR YOUR HELP, BY THE WAY IT WORKED FINE TODAY UNTIL I UNPLUGGED IT FROM THE MAINS, THEN NO POWER NEXT TIME I PLUGGED IT BACK IN. WILL LET YOU KNOW HOW I GET ON,......CHEERS AGAIN PETE.

P.BOOTH2002@TISCALI.CO.UK
February 2006

Don,t recognise the model but if it is just a start up capacitor it will normally be in the primary circuit (nearest where the mains go in and between this and a transformer) and may find a small electrolytic type capacitor (these are the ones that usually fail). Personally I found that values less than 470uf fail the most.
Try applying a bit of heat using a hair dryer to this area switch off at the mains and on again as the heat may increase it's value enough to allow it to start up although when cool it may drop in value again resulting in no start and really should be replaced.

sparky
January 2006