have split casings but box will not separate. Has 5th (?) gear and a selector spline and fork on outboard end under tin cover, presume these have to be removed. Dif is rather rattley and drive gone, presume bearing collapsed ?
Jim
need to remove 5th gear first. usually circlip holding gear on then usually a pin holding selector on through selector shaft. lever off gear (usually tight) then possibly more bolts under gear to undo holding selector shafts in.
me
June 2009
The re-building of these gearbox's is not for the average DIY as specialist tooling and measuring euipment is required
nc
June 2009
Automatic Answer
We may have found other answers which could help you.