Heater fan switch on my Vauxhall Vectra only works on no 4 setting. ?
Can anyone suggest what the problem is and how to fix it? Vauxhall Vectra 2.0 DTI 2002. There seems to be a clicking noise from somewhere to the left of the dash when the booster is switched on. It is not working on 1, 2 and 3 settings but comes on on no 4. Have taken out the switch and no apparent problems can be seen.
hello i had the same thing on my 2002 vectra. i swapped my resister over and it still didn't work. so i swapped the little blue relay over what i got from the scrap yard. it's left of the fan. and it worked happy days. cheap fix £5
mark van-egghen
January 2014
How does the switch come off ? I have the same prob but not surges how to take the switch off :(
Jane
August 2013
Anyone know the Vauxhall part number for that small blue relay?
Neo196910
June 2013
If you change the resistor and it still only works on number 4 then it is the small blue relay behind the glovebox on the left
Mick G
February 2013
buy a resistor from scrap yard for a pound put it in and enjoy heat from four settings
n01 mechanic
January 2013
i have the same problem with my 2002 2.0 dti vectra, but after removing the resistor, i just turned on the fan and surprisingly it still worked on 4 without the resistor?????????
pablo
August 2011
you can get the resistor from maplins for under a pound put do not solder put spade conectors on it .i had the same problem
dave
February 2011
Hi, if you type into Ebay Vectra fan Repair you will find a company who do it for £10.00,. That's what I am going to do!
Dan
March 2010
hi mine dosnt work at all anyone know where the fan heater is on a 2003 sri dti thanks
tony
January 2010
I have the exact same problem on my 2003 vectra sri? I didn't look at the switch but did give it a swift jab of the fist and that didn't solve it?? any more ideas?
Pumps
July 2009
Usually the resistor block burnt out when this happens. You'll need to replace it with a new one.
ChicksFan
June 2009
I can answer this question...
Heater fan switch on my Vauxhall Vectra only works on no 4 setting. ?
howtomendit.com for free repair help, information and advice.
