How can i fix my Thomson DTI6300?

This fault is due to a broadcast issue which has led to a corrupt file being loaded onto the hard disk. For a solution paste the following address into your browser. Unfortunately you will lose all your recorded (library) files and will have to reprogram all your channel info etc.

http://www.topuptv.com/help+centre/setup+and+troubleshooting/Fail+boot+up

David
May 2009

see TOPUPTV website (www.topuptv.com) there are instructions for resetting box; after 4 attempts my digi-box is now working properly again.

Katie
May 2009

I have been trying for 3 days to fix ours and have finally done it.
Switch the box on and leave for a while then take the mains connector out of the back of the box and leave for more than 20 secs, then whilst re plugging in the mains connector, push the on/off button on the front of DTI repeatedly, once you see a light blip, then release your hold on the on/off button and quickly press the up/down/left/right arrows once(in that order), it went through a light sequence but then my amber light supenly turned to red, yippee! though we have lost all saved recordings and I have had to scan for channels agian.

sarah
May 2009