I need a Delta Breadmaker repaired - any ideas?

I had a problem with the spindles which seized, take
the circlip off and tap the spindle out, do not damage
spindle, you will need to remove the rust from the spindle, apply a smear of grease and reasemble, I fixed
mine 6 months ago. When you put the machine away
check the spindles turn freely.

wesso
June 2009

Hi Maggie, I've got a problem with a seized spindle on my EBB 010, the company that imported them was Beaver Electronic Services of Walsall, 01922 725554. The phone is dead and I've been told by a local TV repair company that they dissapeared a year or so ago. I'm afraid I am going to have to buy a new, but different one. Shame because it was a good machine, sorry I can't help you further.
Roger

Roger
June 2009