Recent: Will I need to replace my garden tap?

Mend > Vacuum Cleaners

Mend Kenmore Motor Circuit Connections

Vacuum wiring?

what now? which wires go to what? original motor has 2 red wires. one goes to reset/overload and the other goes to a black wire in the wand connection. the new motor has one black wire with a metal clip and one white wire. should i cut off the tip and connect to black wire in the wand? has a 3 connection circuit-motor-reset-wand. i checked my newer kenmore and the black wire goes to a light-the old one doesnt have a light.

icandothis
April 2009
happy ending.
1.drew a diagram of what went where.
2. disconnected one wire at a time. that way i didn't get confused.
3. reassembled with new belt and new motor.
4. job completed for $60-same would be charged to diagnose problem
5. zoom zoom zoom-1 happy camper
6. thanks for all your help-couldn't have done it without you.

icandothis
May 2009
Yes, the replacement motor will work the same. Just cut the connectors off of the wires on the replacement motor. Then use wire nuts to connect them to the original connections. Colors of wires do not matter.

www.vacuumcleanerhelp.com
April 2009

Related Questions ...

Mend proform treadmill motor
1

How can I fix my Pro-Form Personal Trainer Electronics Treadmill?

with the motor hood off, both circuit boards light up. The display panel lights up and you can change settings... [Read more]
Mend How to mend it?
1

Connections for single phase Jet Fan?

I have a Thermal Engineering Systems Jetfan (JF1804)with a speed control by S & P. This is a single phase indu... [Read more]
Mend motor power model
2

Why doesn't CD spin motor power up in JVC audio system?

I have a CD/casstte/radio JVC model no. CA-MXS2BK. When the CD tray closes, the CD lens motor powers up from t... [Read more]
Mend washing machine motor circuit board
1

Hotpoint First Edition 1000 WM52p blowing fuses?

My son's washer was filling and emptying but no motor movement Close examination of the circuit board showe... [Read more]
Mend washes stops machine
1

My Whirlpool AWM328 washes OK but stops at wash/rinse?

Machine completes wash part of cycle but stops when it gets to the rinse/spin point. Have checked all obvious... [Read more]
Mend pump problem failed
2

Indesit D41 Pump Out Problem?

The main pressure pump failed (windings burnt out) on my Indesit D41 dishwasher so I replaced it, all went wel... [Read more]
Mend washing machine circuit board motor
1

Has anyone the connections for a Hotpoint WM52 timer?

I have recently purchased a replacement timer (with circuit board) for my Hotpoint WM52 washing machine. I ha... [Read more]
Mend spin machine stopped
5

Motor of Indesit WGA 1036 TX will not spin?

Our washing machine stopped functioning :( But everything appears to be ok *except* for the motor which will ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...