Recent: Windows 11, Dell 5450, JBL Bluetooth headphones?

Mend > Vacuum Cleaners

Mend Dyson DC04 Vacuum Dc04

change mains lead on dyson dc04?

how do I remove the switch assembly on the dyson DC04 vacum cleaner. the cable has broken just outside the cable restainer.

neville greenwood
April 2009
I have just taken off the yellow on/off switch and followed the hints above. Excellent, however I found that by simply moving the flexible hose out of the way, you will see a small hole that leads from the hose housing into the on/off switch assembly. Just push a small screwdriver through the hole as that pushes the plastic clip away from the assembly and the on/off switch just lifts off.
Dyson deny there is any problem with the wiring where it goes into the switch, but this was the third time it shorted out. Dyson of course refuse to assist in helping to remove the switch (elf and safety, blah blah) but we know better. In fact, the design is so poor when wires are twisted or pulled (everybody does it for Heaven's sake) there will eventually be a short which could kill someone. They make 35 quid a visit too!.

Bryan
May 2009
Just done this 10 mins ago.
You have to remove the yellow on /off switch first. This is actualy a cover to the switch below. I removed mine with x1 of the centre prongs of a fork. Bend the centre prong to 90 degress to the fork handle, and put a tiny kink at the end of that prong. (you should end up with a funny lookink "Z" shape. Bend the remaining x3 prongs totally out of the way. Keeping the yellow switch cover up - use pliers here- push the singular prong down the flat egde of the cover. ie inboard. When you think you have the clip pushed in pull the cover up with the pliers and - hey presto access to the actual sw and wires is revealed. BE CAREFUL WITH THE PLIERS.

Shunie
May 2009
Down the side off the on/off button there is a clip that needs pushed in to allow the on/off cover to be removed. Looking from above there is a flat sided part to the switch, using a small screwdriver insert down the side to push in clip. Once you get on/off cover removed you will see a small screw that allows you to remove cable connector that connects external cable to cable that runs down to motor.

Kevin

Kevin Fraser
April 2009
dysonmedic.com

is excelent - all you need to know - pics & text

Peccavi
April 2009

Related Questions ...

Mend replace vacuum cleaner
1

how can i replace cable on dyson dc04 vacuum cleaner?

how can I replace the damaged cable on a dyson dc04
Mend dyson vacuum cleaner repair
3

How can I repaire my Dyson DC04 de Stijl vacuum cleaner?

The mains cable has snapped near the point of attachment to the on/off switch. I cannot find a way to get in s... [Read more]
Mend vacuum dyson cable
1

dyson dc04?

My vacuum cleaners cuts off now and then, I think it is the grey cable that has come loose, i need to open the... [Read more]
Mend dyson vacuum cleaner cable repair
2

Dyson DC04 vacuum cleaner?

how do i remove on/off switch for cable repair
Mend dyson vacuum cleaner repair
1

How can I remove the casing from the motor of Dyson D)4 Vacuum Clearner?

how can I remove the casing from the motor of a Dyson DC04 Vac Cleaner
Mend removed plastic cap
1

How do I attach the removed 'vacuum pole' top/cap ?

My DC04 fell and the green plastic cap & metal clip/spring at the top of the vacuum pole/column/handling colum... [Read more]
Mend dyson brushes stopped
6

Why has Dyson DC04 lost suction and cleaning brushes stopped rotating?

After I removed shoe laces from the main nozzle that had got accidentally sucked in and wrapped round the clea... [Read more]
Mend dyson vacuum repair
1

dyson dc04 does not work at all?

dyson vacuum does not work at all. I checked the plug fuse also still the same.
Mend dyson vacuum repair
1

How do I fix my dyson DC04 vacuum?

The cable at the point of entry into the Dyson model DC04 has broken. I need to find out how to remove the cov... [Read more]
Mend screw power cable
1

How do I remove the switch on a dyson dc04 vacuum cleaner?

I read higher up that there is a security screw under the switch, how do I remove the plastic housing to get t... [Read more]
Mend vacuum cleaner dyson power cable
1

how to replace the power cable?

i need to replace the power cable on a Dyson DC04 vacuum cleaner--how do we do that
Mend dyson repair vacuum cleaner
1

how can i fix my vacuum cleaner dyson dc 04 upright?

how do i take the push switch off to repair a broken cable?K Beckett
Mend dyson vacuum cleaner repair
4

How can I access the switch mechanism on a dyson DC04 vacuum cleaner?

The power cable is become loose after much use and needs reconnecting more securely. I cannot see how to remov... [Read more]
Mend suction dyson dc04
1

poor or no suction dyson dc04 absolute?

my partner lent our vacuum to the chimney sweep thinking he would just vac up a small amount of dust BUT he us... [Read more]
Mend vacuum suction dyson
2

How can I fix my Dyson DC04 Upright Vacuum Cleaner?

My Vacuum has very limited suction throught the main vacuum and when I use the attachment it is 5x too powerfu... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...