Recent: Lg vcr?

Mend > Vacuum Cleaners

Mend Kenmore Vacuum Upright

Kenmore Upright Vacuum Roller bar will not spin?

The belt broke and I replaced it. It worked fine for a few minutes then the belt broke again and the roller bar will not spin.
Help?

Swass
January 2006
You may have some thread, hair, or other material wrapped around the spindle of the roller. With a new belt it still may not move, so the belt spins, heats up and burns through.

With the vacuum UNPLUGGED, there should be a way to unclip or unfasten the roller, remove it and clear whatever material around the spindle is causing it to foul (not turn). If the motor starts and runs enough to cause the belt to break, the cause is almost certainly on the roller.

Kerry
February 2006

Automatic Answer

We may have found other answers which could help you.

Click here for Kenmore Vacuum Upright

Related Questions ...

Mend vacuum cleaner cover
1

How can I fix my Kenmore Progressive Upright vacuum cleaner?

I've successfully removed the large plastic cover over the bulb, but I can't seem to actually remove the bulb.... [Read more]
Mend vacuum cleaner clog
1

agitator will not turn on Kenmore vacuum model 116.31913?

Was vacuuming up some dirt and small dry leaves in the Florida room, using the attachments. It clogged. I un... [Read more]
Mend Kenmore Vacuum Cleaner Power Cord
2

Replace power cord on a Kenmore 116 31913100 vacuum clewner?

How do I replace the power cord on my Kenmore upright vacuum cleaner -- model # 116 31913100? I don't know how... [Read more]
Mend year blow air
1

vacuum cleaner is not suctioning?

2 year old kenmore upright vacuum will only blow air out the side allergy vent panel and not suction through t... [Read more]
Mend vacuum cleaner belt
11

how do I open my kenmore vacuum model 116 31312100 to replace the?

how do I open my upright kenmore vacuum cleaner model number 116 31312100 to replace the belt?
Mend vacuum Kenmore owners manual
1

How can I get an owners manual for Kenmore vacuum model #1163451290?

I need an owners manual for a Kenmore upright whispertone vacuum model # 1163451290 that has explosion diagram... [Read more]
Mend kenmore vacuum 116
1

Replace Belt on Kenmore Vacuum ?

How do I replace the belt on Kenmore Model #116. 32730241 Upright. There is a little door on the top of vacuu... [Read more]
Mend kenmore replacement vacuum
1

How do I install a replacment belt in Kenmore?

How do I install a replacement belt in Kenmore Progressive 400 upright vacuum?
Mend find operating manual
1

How can I find an operating manual?

How can I find a copy of an instruction booklet for Model 116 31913100 Kenmore Progressive Upright vacuum clea... [Read more]
Mend kenmore model power
1

How can I fix my Kenmore Model 116.3091.2000 beltless upright vacuum?

The power drive and power assist is not operating. I have tried the red reset button with no avail. The ligh... [Read more]
Mend working vacuum model
1

Self-propelled faeture not working?

I have a Kenmore upright vacuum - model 473 38810. The self-propelled feature is no longer working. What are t... [Read more]
Mend problem kenmore work
1

I have the same problem?

Our Kenmore Quickclean upright is brand new, and we've tried everything to get the suction to work. We've misp... [Read more]
Mend vacuum belt kenmore
1

Kenmore vacuum belt changing?

How do I change the belt on my Kenmore Upright model 116 with 7.2 amps
Mend vacuum kenmore replace
1

how do I replace a vacuum belt?

How do i replace the vacuum belt on a Kenmore upright powerpath 12.0 amps?
Mend kenmore vacuum progressive 116
2

My kenmore upright suddenly has no suction. Is there a possible fix?

Is there anything I can try before resorting to purchasing a new vacuum? It's a Kenmore progressive, model 11... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...