How can I fix my Hotpoint TC71 Condenser Dryer?

hi, I took my tc71 apart and now not sure which color wire goes where ?? help please

roy
October 2014

My timer knob doesn't engage and go round. The timer has been making a clicking sound. Do I need to replace the timer or just the knob? Any help gratefully appreciated! Thanks

Polly
March 2012

how to put on new belt

jeff
September 2011

i have a problem with my hotpoint dryer! water leak on d bottom of dryer ( inside back wall)

Lucy
January 2010

how do i get the cold dry on to warm heat

shirley
October 2007

my hotpoint condenced dryer is blowing cold not hot how can i fix it can you help please

nikki
October 2007

hi about your condensor dryer ive had same problem ..if you remove the relay switch (note do diagram of the 4 wiring terminals and were they go back)..you will see that the contacts in the switch have gone black this will cause the drier not to work ,,you can remove the clear plastic relay cover and gently using fine emmery paper clean up the contacts.....then put back togethor and replace the wiring and put back in place behind the facia...this take only 10 mins from start to finish ....and the main problem i go out too is blowing cold ,,in order to prevent thermostats tripping out (these parts control the heat to the drier)

always check the condenser unit which is at bottom above water tank if fluff blocks these spaces on this condener unit
not enough cold air can get in to m/c ,,this blows stats...

thanks
john

john lang
September 2004