Mend > Oil Filled Radiators

oil burner won't restart after reaching temp?

I have a burner that needs to be reset after it has run and reached temp. Then when the water cools it needs reset to get it going again. any ideas how to fix this?

little
March 2009

Heating, Oil Filled Radiators Burner Restart Going

i mean that i have to press the red reset button

little
March 2009

Good comment, John the boilerman.....if he's resetting the boiler reset rather than the lockout it probably means that the flue temperature is too high due to needing a decoke. We'll probably never know. Cheers John

John
March 2009

A bit vague, this one....I suggest that the coil that opens the fuel valve in the oil pump could be faulty, as its one of the causes that could be temperature related...however there are other reasons, including a possible carbon build up inside the boiler.

John
March 2009

Hi, when you say the boiler needs to be reset. Do you mean that you press the burner reset button (red light) or do you reset the thermostat which is next to or on the boiler?

John the boilerman
March 2009

Click here to mend oil filled radiators

Where can I get a manual for my ritetemp oil heater ?

Dimplex RMG25 causes circuit breaker to pop?

Sorry the make is dimplex model FC2009Ti?

What size spanner to free rad bleed valve?

How can I mend my Hyundai oil filled radiator?

Low pressure below 1, Lockout on. won't rest?

Oil filled radiator won’t stop clicking?

Glen Dimplex Oil Filled Heater OFC2000 2KW?

My electric oil heated radiator isn’t heating up properly. ?

Efficiency of my oil heater?

vonhaur Dragan 2500w oil electric heater no power?

Fix my oil filled heater?

Mend Oil Filled Radiators

Related Categories

Mend > Oil Filled Radiators

oil burner won't restart after reaching temp?

oil burner won't restart after reaching temp?

I can answer this question ...

oil burner won't restart after reaching temp?

How to mend ...

Mend oil filled radiators ...

Daewoo hea1130 model 7 fin?

Firebird Combi?

Efficiency of my oil heater?

What size spanner to free rad bleed valve?

Comfort zone?