I need to replace the washers in a mixer tap faucet, and as there is no grub screw to the rear of the mixer tap faucet, I presume that the unit pulls off from an upward position, but first does it have to be aligned ? if so what position does it have to be in, the taps are Ideal Standard.
If there is no grub screw than it should be allian in line with taps mixer right possiably or left then pull upwards. it was pu in so it has to come out this way
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix plumbing.