My radio is working but there is no display on the dash and the fingertip control on the steering column will not work.
I was going to disconnect the battery then reconnect to see if that would fix it but i am afraid that the fingertip control will still not work and therefore i would be unable to input the code and then i would have no radio at all - PLEASE HELP
The globes on the display need to be replaced, you can get to the display by removing the LH and RH and Speaker covers undo the screws for the dash board and lift out. The globes can be bought at any auto spare shop just thread the globe wires onto the old older.
hope this helps
April 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix in-car audio.