start it up without the bar connected to see if the oiler kicks out oil, should come out a teaspoon every 20 secs, if this works, the problem is with your bar being incorrect or oil holes blocked. if it doesnt oil then check the filter & pump mechanism.
Steve
February 2009
try rinsing tank out with diesel. make sure oil isn't too thick
dd
February 2009
"OILER NOT WORKING"
I took that to mean the oiler is not working, rather than "THERE'S NOT OIL GETTING TO MY CHAIN", so surely if the oiler isn't working, then no matter how much cleaning you do it isn't going to magic into life is it?
pleasant
February 2009
The 1st thing I would try is take the bar off and clean the groove where the chain rides, also blow out the oiler holes in the bar with an air compressor. I have had to do this to mine occasionally as sawdust clogs the oil passages (saw dust and oil make a plug) . Hope this works
mitch
February 2009
Any repair can be carried out by anyone- it all depends on the individuals knowledge and competence
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix chainsaws.