how do i change the belt on a white knight 382?

firstly remove the top of the dryer to expose the drum, then remove the back plate that houses the heating element. remove the plate on the bottom of the dryer so that you can get your hand in when you have to refit the new belt, now remove the screws from the left hand side and the bottom of the back panel, this will separate enough to slide the belt between the drum and back panel, once the belt is on the drum put the screws back on the back panel then flip the dryer over so that you can get your hand in the hole in the bottom and pull the belt onto the motor, and make sure its in line. refit all panels, job done

paul f
October 2006