my dishwasher won't stop!Baumatic BFD60ss?

hi i have the same prob with my dishwasher did any one get theres fixed please help

michael
October 2006

This may help
Let me know how you go with this.

The cycle doesn't complete
If the cycle doesn't complete, check these:

Water-heating cycle
Timer


Water-heating cycle
Many dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle calls for it. In these cycles, the dishwasher pauses after it has filled with water, waiting for the water to reach the pre-set temperature. What happens next, depends, as follows:


On some units, the pause is timed and the unit continues after the allotted time.


On others, the cycle can't continue until the water reaches the higher temperature. If you have this type of dishwasher and the water isn't being heated (say, because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues. When you repair the heating-system problem, the "cycle problem" is fixed too.




Timer
Timers don't often fail. But if every other part of the dishwasher seems to be working properly and the timer knob seems to be stuck in one place--doing one function continuously--the timer may be at fault. Dishwasher timers can't be repaired. If yours is defective, replace it.

redmegs@yahoo.com
April 2006

I also have a baumatic dishwasher BFD60ss, a programme which should take 1/2 hours, is taking several hours and my dishwasher will not stop.

Please help!!

beverley scott
December 2005