Help. ignition key wouldnt go into my barrell one day because my key was a bit chewed up. i changed barrell and had new keys but it wont start. i thought that if i kept the old key in the van that it would knock the immobiliser off and i could start it with the new barrell and keys. what do i do or how can i bypass the immobiliser
HOPEFULLY YOU STILL HAVE YR OLD KEY . IT WILL HAVE WITHIN IT A CHIP. U NEED TO SECURE THE OLD KEY IN CLOSE PROXIMITY ( TAPE OR CABLE TIE IT) CLOSE TO THE IGNITION KEY HOLE ( IDEALLY INSIDE THE COWLING) THEN YR NEW UNCODED KEY WILL WORK AS YR OLD KEY `CHIP` WILL DO THE BUSINESS WIV THE IMMOBILISER.(NORMALLY THERE IS A PICK UP THAT LOOPS AROUND THE IGNITION BARREL WHICH COMMUNICATES WITH THE CHIP IN YOUR KEY ( IN THIS CASE YR OLD KEY!)) NOTICE ONCE THE VEHICLE IS STARTED AND UNLOCKED YOU `SHOULD` BE ABLE TO PROGRAMME A NEW CHIPPED KEY- I DON`T HAVE SPECIFICS ON THIS- GO TO A REPUTABLE AUTO TYPE LOCKSMITH - IT`LL COST U LESS AND LESS HASSLE THAND A DEALER.
STEV AL
February 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix car alarm systems.