How do I fix the recoil pull rope on my snow blower?

once you remove the housing you crank the recoil tension all the way back as far as it can go. then with a screw driver placed between the bracket as a wedge, you hold that tension. making sure that the reel and rope hole is a a lined. then you take a match a burn the pull rope on the end, using a glove on your hand."shape the rope to a point so that you can feed it threw the bracket hole and the reel hole. The last thing you do is make a knot on the end of rope. then take the screw driver out. you are done!

Andrew Dixon
January 2009

You have to wind the rope pulley (after you put on the new rope) a couple times before guiding the rope end through the starter housing.

Vance
January 2009