Mend > Gym/Fitness Equipment

Mend Roger Black Gold Fuse Keeps Blowing

How can I fix my Roger Black Gold treadmill - the 10am fuse keeps blowing?

Can anyone give me some advice regarding my Roger Black Gold Treadmill.
The 10 amp fuse keeps blowing on the circuit board. I've checked the machine over to see if it was shorting out and it looks fine to me. I am wondering if this is a common fault with this specific treadmill. Has anybody got any ideas what could be wrong with it?

Nigel
January 2009

Roger Black Roger Black Gold Leisure Equipment, Gym/Fitness Equipment Fuse Keeps Blowing

oops sorry Maplin or you get what i mean ;-)

Andrew G
September 2010

hi guys it's the fuse in the front part when you open up the front where the plastic part is at the front with the logo un screw that section there are 3 screws at the front under neath as well you can pop off the front you will see a class fuse replace that from Maplinor any type electrical store fuse cost for a pack of 10 £2-79 the part number is GL67 it's a 10 A fuse ;-)

Andrew G
September 2010

Hi mine has stopped running altogether it will raise and lower but will not run, there is nothing on the display. Help!!!!!

David
February 2009

any luck on this?

Andy
February 2009

Hi Nigel my Rodger Black Gold treadmill has just developed exactley the same fault two days ago except mine has another worrying fault that has occured at the same time the motor just runs at full pelt if you bypass the fuse holder.I have a friend who is a electronic whizz who is going to take a look if I gain any helpfull info I will letyou know.

regards Paul

Paul
February 2009