Recent: Home max fs506x?

Mend > Steam Irons

Mend Rowenta Iron Advancer Water Crack Plastic

The iron leaks water. It is an Iron Advancer by Rowenta?

The iron leaks water all over the ironing board. There is no crack in the plastic chamber that holds the water. The water is dripping on the inside wires as well.

Diane
January 2009
I also have a Rowenta Advancer Iron that leaks. Where can I get a manual so I can try and fix the problem?

Laverne Tatge
April 2010
i have the same problem and i have not had the iron that long. i've never had an iron do this. my previous iron was the rowenta professional lux. it was less expensive and a much better iron -- and it didn't leak! i had it several years until i dropped it. i thought then that i would upgrade to the best; the Advancer is certainly not it!

Cindy Stuart
March 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Water Crack Plastic

Related Questions ...

Mend bath kettle water
1

How can I fix my cracked bath?

Unfortunately a full kettle of water slipped out of my hand and cracked the bath. It made a coin size, shell f... [Read more]
Mend leak drum repair
3

Hotpoint WD64P outer drum crack/leak?

During 1200 rpm spin, machine made horrible rattling noises. Turned off and inspected. Found :- 1. Hairline... [Read more]
Mend repair board water
1

Basketball post base repair?

Hi, The base of my basketball Board was run over by an suv. The strong plastic-made base which holds the w... [Read more]
Mend plastic water butt
2

How can I fix my plastic water butt?

I have a plastic water butt which has a vertical 10 cm crack about 5 cm up from the base. Can it be fixed an... [Read more]
Mend water small bottom
3

How can I fix a leak in my plastic water butt?

Have a plastic water butt used to water plants in garden. Just recently have noticed it has a small crack on b... [Read more]
Mend water bottom lot
4

How can I mend a hole (hairline crack) in my plastic water butt?

The hole is at the bottom of the butt so is under quite a lot of pressure from the water. I think I will need... [Read more]
Mend How to mend it?
2

crack in hull?

i have a crack in my 1997 760 2 seater waverunner. ive tried epoxy, fiberglass, and someone told me fiberglass... [Read more]
Mend water crack plastic
1

How do I do I fix the resovoir on my Black & Decker Steamworks?

The resovoir that hold the water has a crack in the bottom plastic. Is there a cement that will hold and preve... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Steam Irons ...