leaky stabiliser valve Triton T200RE?

I fixed mine by removing the diaphragm from the stabiliser valve, drying & cleaning with methylated spirits and a liberal use, both sides, of super glue including letting the glue run in a around the annual ring.

Forgot to say the basic problem was a couple of splits in the rubber diaphragm. If glueing didn't work (it did in my case) would have made a simple replacement diaphragm from sheet of suitable gauge rubber.

David Clay
September 2011

I had the same problem. Spares unobtainable, valve internal diaphragm split (complex shape, impossible to replicate. Solved by removing the innards and sealing the whole thing with a plain rubber sheet. It doesn't regulate the pressure any more, but it doesn't leak, and the shower performance seems ok. (Temperature doesn't vary wildly). May be a safety issue here though!

Barny
January 2009

Sorry Dave - correction - my e-mail is:-

david.clay@orange.net

David Clay
January 2009

Dave J-D. Did you find a fix for the T200RE leaky stabiliser valve. Mine is leaking from the spindle. What's in this valve? If I open it up may be some new 'O' rings or something will do the trick

david.clay@orande.net

David Clay
January 2009