My dishwasher is currently not working. We had put the appliance on, as normal, and my missus opened the door mid cycle to add something.
However the water would not drain and now their is an F4 error message on the panel which I cannot fix. It also beeps continously as it try's to start a wash but fails.
Has anyone experienced the same problem and how can I fix it as I'm getting sick of doing the washing up!
Took off the plate and removed the water. Then put the dishwasher on a new cycle and it flashed f2.
Something tells me it's goosed! Am I right?
robfranlong
January 2009
Foxy,
I emptied the water out of the base and put the washer on another cycle. It started then after about a minute made a clicking noise repeatedly and then it started bleeping as before.
This time the error message was F2 rather than F4.
Driving me nuts!
Thanks
robfranlong
December 2008
mine is doing the same did u get it fixed...im looking for it to be repaired but dont want to fork out a fortune
lorraine
December 2008
Thanks Foxy. Have you got a PM address I can contact you on as I'm going to try that tonight.
robfranlong
December 2008
Hi Rob, F4 is a no drain fault.It could be that the drain pump is jammed and needs to be taken off and freed.It could be that water is in the lower base so check this by taking off the plinth,then the metal front base cover.If there is no water in the base and no water in the machine then it will be the pressure switch.All the best.
FOXY
December 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.