How do I enter the radio code in a Renault clio?

You can check the true information from this page: https://www.carradiocodecalculator.com/renault-clio-radio-code/

Kriss
March 2023

I wonder if anybody can help i need a radio code for my 2000 1.2 clio its the MTV radio system

chris
October 2015

hi everyone my car is renault kangoo and my radio is tuner list i have the code but when i open the radio the are word ''code'' when i press eny boutton its bipping and i cant enter the code what i do plz help

mjhamza23
August 2015

This app (Renault Radio Precode Parser) help calculator renault radio code. Free and easy (Android app )

red car
March 2015

This app help calculator renault radio code. Free and easy (Android app)
>>>Click here to down it on Play Store

red car
March 2015

I have installed a Renault tuner list radio/cd and switched on the unit but the panel shows nothing.
Three connections are there black white and yellow.

john p.
September 2013

my radio just says code and wont do anything else. how do i fix it? someone please help me

jak
May 2013

I do not know the code for my radio for my renault clio 1999 the first of the 0000 is flashing

janette
February 2013

where do i find the code please ?

lupen
January 2013

ooo5

roy
October 2012

how do i enter the code if al that i can see is ( - - - -)

CG43
March 2012

elo on my 02 clio to not av to wate long 4 radio code to cum on, pres 2+5 at same time then pres radio on buton, and code coms on a lot qika each each time

paul
January 2012

When the 0000 comes up, you can use buttons 1,2,3,4 to change between digits (1 selects first digit etc) then keep pressing that same button to increase the number. For example, if your code started with 4, you would press 1 to select the first digit, then press 1 four times to change it to number 4 - then press 2 to move to the next digit and so on. After changing all the zeros to the correct number, you can hold down 6 for a few seconds and the radio should start working. This worked on my 51 plate clio, which also has the radio remote stick on the side of the steering wheel, but I found this method first. Presumably this method would also work for models without the remote stick.

Em
January 2011

I've just had to enter the code in to a renault clio 55 plate and managed to do this by turning the wheel on the radio control stalk (the one you'd normally use to change tracks on a cd) to change the number, then clicking the wheel once towards me to move to the next digit. Once all 4 digits where in I pulled the wheel towards me again for 2-3 seconds and the radio now works.
Hope this helps.

Jo
December 2010

to enter your code hold 6 dow. please can anyone tell me how to enter my code but it says error and i can not seem to get error off but i know my code.

Thank you for telling me about the central locking that you disconnect the battery then the central locking will work, this did for me thank you

carley
December 2010

i put the radio on and just cums up code i have the code but cannot get any further than this can u help

geoffnev
December 2010

Hi,

My radio just says 0000 but I cant get it to flash. I know my code and how to enter it but cant get the code to flash to enter the 1st digit.
Any help would be appreciated! Have tried turning radio on and off, engine and and off, pressing random buttons down and holding them but nothing seems to work!
Thanks

Nat
October 2010

I wound up using a mixture of gary and emma's suggestions. At first our radio said 'error' in the display. It had to be left around 5 to 10 minutes before the 0000 came up. Sure enough the little wheel at the back of the remote control stalk changed the digits, (as did the arrows on the radio panel, but not the numbers) but the mute button didn't work when I tried to accept the first number. But pressing seemingly random numbers on the radio panel did work and it moved to the next flashing digit eventually. when all 4 numbers were in holding the mute button on the stalk didn't work. I had to hold number 6 in for a few seconds. Maybe our radio has just gone slightly faulty but it works fine now.

David
February 2010

i have found that you turn the wheel to change the numbers and the channel changing button undernearth the stalk to move across the digit positions. To enter i press the 6 buuton for a few seconds.

gary
December 2009

Here is another way - not using Steering Wheel Stalk.

When inputting the code, it can be done using the numbers on the radio. Channel Numbers 1 to 4 change the number of the corresponding digit position on the screen. Use the LEFT/RIGHT keys (on joystick to left of channel buttons) to decrement/increment the current digit. then holding down 6 for approximately 3 seconds will enter the code you have entered, confirming with a beep tone.

Ben McInerney
October 2009

I tried using the mute button but it never woked. I used the button at the botton of your keypad at the sieo the wheel think its used for changing the radio station.

Toots
May 2009

hey, i dont no if anyone comes on here anymore, (last comment 2005 lol)

but i have the same problem, i understood the reply but i have no mute button between the volume buttons, i have to hold the + and - together to mute mine. any suggestions?

Emma
February 2009

Hiya, I had to figure this out after changing the battery on my girlfriend's Clio today.
Firstly, turn on the radio (duh!). The code 0000 should be displayed with the first digit flashing. Turn the small wheel on the back of the radio control stalk and the flasing digit will change. Once it is set to the first digit of your radio code, press the mute button on the radio control stalk (between the volume buttons). The next digit should now be flashing. Use the small wheel again to change each of the other digits in turn pressing mute after each one is set correctly. Once all the digits are correct, press and hold the mute button for a few seconds and HEY PRESTO! The radio will work normally.
Hope I explained it well enough. Good luck!

Kenny
December 2005