Recent: Fix food processor motor?

Mend Murray Lawn Mowers

Mend Garden Tools, Lawn Mowers
Find out how to mend it for free.

Ask Question
Mend Garden Tools, Lawn Mowers
Click here to mend Murray lawn mowers

Mend > Lawn Mowers

Mend Murray Blade Removed Bolt

How Is the Blade attatched?

I removed the blade on my Murray Walk behind to sharpen the blade. The bolt broke off insive the shaft from the engine. I have an easy out but it broke inside the shaft also. I want to remove the flange at the base of the shaft I see that it has a key way, is it pressed on or how is it removed. If I can get this flange off I can get the broken piece of bol;t out

Bill Hoadley
August 2004
It should easy to take off. It may have some rust on the shaft and the flange. Firt thing to do is to pray the shaft and flange with WD40 and let it sit for a few minuts. After that tap on the sides of the flange to loosen the rust and try to tap it off the shaft. If that won't work than go to the auto parts store near you and tell the counter clerk that you need to buy a two arm puller. He sould know what you are asking for. Good luck!

Lester (chetsbro1@cs.com)
August 2004

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Blade Removed Bolt

Mend Garden Tools, Lawn Mowers
Click here to mend Murray lawn mowers

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Garden Tools, Lawn Mowers
Click here to mend Murray lawn mowers