How can I mend my digivox?

you go to your system information then type the code 1004 and check to see if your emu is on





thanks ha i 16 and i figured this out

lucaboy
February 2009

Thanks Mick.
I had EMU turned on. I did what you suggested about the codes and it worked for 24hrs then stopped again.

HCN
December 2008

try this first , i want to see if you have the EMU turned on , press menu, go to (systen information) press ok" to enter system info" , now type 1004 on your remote at your screen , , a new menu will open up. in there check to see if the EMU, is set to ON" , if not do it with your remote , , then exit back out and start your scann again , ill check back tomorrow , mick 00.01 am

mick
December 2008

Thanks Mick.
This may seem really daft but I've never had to do that before so how do I go about entering them? Will search other threads to see if I can pick up the codes.
Cheers

HateChoosingNames
December 2008

looks like that firmware is not updateing the codes on , auto , , try putting the codes in yourself . see if you can get them here on this web site, , try that first and ill get back to you mick

mick
December 2008