How do I fix my Zanussi washer drier which is not drying but still gets hot?
It is a jet stream washer/ dryer and does not dry the clothes when they are on the drying cycle, although it does still get very hot.
I have emptied the little filter at the front of the machine and pulled the whole machine out to see if I can get in the back to remove any filters from there but the whole of the back appears to be one piece of steel and therefore immovable.
the back half of the machine comes off and is split down the middle.2 plastic caps at the bottom sides which need to be removed.lid removed (2 screws at back).2 or 4 screws secure rear half under lid you removed and 2 or 3 screws across rear panel at the bottom.once you have removed the rear panel you will find a condensor tank down the side and these get blocked causing your fault.remove condensor tank and wash it out with a hose.refit all parts and test
ck
December 2008
I can answer this question...
How do I fix my Zanussi washer drier which is not drying but still gets hot?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix tumble dryers.