i have a M reg 1360 diesel with cav injection and have found a 1500 with bosch injection . the engine will fit but the pump has other wires going to this unit? Q1 is this a load switch/is it needed Q2 who do i make this fit my wiring loom PS the switch is on the bach right hand side looking down it has 3 coloured wires 0.5 mm in size coming out of a 10/15mm long tube (thankyou for help)
Hi shane, what control box was needed, looks like I have the same problem! was it easy to fix....
Rob
October 2006
all running now , reset choke /more work to be done to the rest of car ,drive shafts ,ect
shane 34/kent
November 2005
found out that wiring loom is diffrent had to rewire engine wiring to fit new control box plus i needed all the pipesfor coolant . i used the 1500 wiring loom and put the 1360 plug on the end .Having problems with cam timing will try again tommorrow . total pile of cr#p second hand engine /head gasket gone . new head gasket on order /let you know the outcome soon
shane 34/kent
November 2005
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.