Hi Guys
the only one fix for this hi-grade or fujitsu siemens similar units are to replace the via vn896.
here is the testing method
take ff the motherboard from laptop leave the fan and heat sink on
take off the wifi card
on hot air solder station set the temperature to 160 C
heat the chip up to 100C measure with laser thermometer.
after that quickly plug the power lead then
turn the unit on the wifi light goes off.
when the board has faulty gpu then the wifi light is on with or without card this is the symptom of faulty gpu.
after short time you will see the led lights blinking then the post start with error default mode in this mode the unit works until is hot.
what is happening?
when you heat up the chip to 100C inside the gpu you have the chip on NVidia or other is that small glass surface below you have nano balls.
if they are everheated they easily brittle.
because hi-grade and fujitsu siemens has the aluminium plate sticked down with double sided sticker this react like insulation.
this cause brittling the internal circuit of these chips.
unfortunately reball not helps.
I did 20 unit from 20 reball only one worked.
the guy who decided to fit the aluminium pad on the chip with double sided glue we can call him a dic k.
if you decide to replace the chip beware pf ebay sales most of these scammer Chinese companies buying in bulk faulty motherboards and taking of parts and rebaling them and packind to look like new.
new chip comes with 1-2 year warranty and welding profile and baking instruction to avoid failure from humid.
so these units are not worth to reball sale it or bin it
gigimorphe
July 2014