Recent: Will I need to replace my garden tap?

Mend > Sewing Machines

Mend Singer 201-2 Please Help

Please Help singer 201 wiring diagram?

I took the wiring apart on my 201-2 to get the electrical cord and the pedal cord off. Now I don't know where the wires go back on correctly. If someone has a photo or can tell me what goes were I would be very grateful. Thanks Cassandra

Cassandra Johnson
October 2008
hi, here's how my 201 is wired: light to 1 and 3; motor to 2 and 3. and controller, if not using a double lead cord, to 1 and 2.
Well done on your choice of machines! this model is known to be the best machine that Singer ever built.

caryl
February 2011
Hello Cassandra,
If you are in the UK e-mail me below with the model of your motor that should be stamped on the back.
Ken

drivewithken@blueyonder.co.uk
October 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Please Help Singer

Related Questions ...

Mend sewing machine repair pedal
1

pedal machine Singer serie K10736204?

good morning? please can you help me i need a pedeal of machines singer series 10736204 series, when i conne... [Read more]
Mend sewing machine singer repair
1

Machine Stuck in Reverse?

My singer sewing machine model 4562 is stuck in reverse. Please help. Thank you.
Mend singer sewing pedal
1

Singer sewing machine model number 237 ?

My sewing machine has started to go on its its when swiched on and the pedal starts smelling of burning , i lo... [Read more]
Mend sewing machine needle thread
1

can you help please ,needle hitting metal and break ?

needle breaking ,as when going down is hitting metal plate, also thread does not pick up thread from the bobbi... [Read more]
Mend singer touch tronic 2010
2

singer touch tronic 2010?

I have done all these steps and my machine will still not thread the bobbin.I dont understand what I am doing ... [Read more]
Mend singer hello working
2

Singer model 1130 main drive wheel very stiff ?

Hello, my machine was working just fine and then the main drive wheel became very stiff, causing the machine t... [Read more]
Mend sewing machine repair tension
1

My singer sewing machine 7442 is not picking up bobbin thread?

My machine is not picking up the bobbin thread and if I lower the needle it is picking up but the tension on t... [Read more]
Mend model hard machine
1

bobbin case loose in Singer Tempo 50, model 9005?

the bobbin case is hard to get into the machine and sits very wobbly, what am I doing wrong or is there a part... [Read more]
Mend sewing machine bobbin needle
1

Not picking up bobbin thread?

I have a Singer #4562 and I took the bobbin case out to clean lint and now it will not pick up the bobbin thre... [Read more]
Mend old wires red yellow
1

i have an old sewing machine with on 2 wires (red and yellow) ?

hi i have an old sewing machine a singer 99k, em 904827. with only 2 wires a fed and a yellow. It has a foot p... [Read more]
Mend singer foot pedal
5

Singer 201k Foot pedal cleaned now not working!?

We were gifted an old Singer 201k sewing machine, which worked fine and good condition. Oiled it recently and ... [Read more]
Mend singer pedal small
1

how can i fix singer -03435-009 foot pedal?

on opening the above foot pedal i found a small yellow component approx 2.4 x 1.4 x 0.7 mm with two protrudi... [Read more]
Mend sewing machine repair motor
2

Singer Futura 2001. The display has stopped working?

...but the motor still runs. What could be the issue? Can anyone please help?
Mend sewing machine repair bobbin
2

Singer 427 bobbin thread won't pick up?

I have a previously very reliable Singer 427, and suddenly, the bobbin thread just will not be picked up. I've... [Read more]
Mend machine sewing fabric needle
2

fixing the feeddog?

I have a singer futura ce150 embroidery machine. When the feeddog is raised and set to sew normally , the fabr... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Sewing Machines ...