Image 10.0 treadmill console problem?

Thank you so much now I know the cause of the problem!!!!

Michele
September 2013

So happy!!! I thought I lost my treadmill but this fix works perfectly. THANK YOU THANK YOU THANK YOU!

Jennifer
January 2013

Just fixed mine!!! I can't believe how easy a fix it was!!! I was ready to give it a ride to the dump but decided to give a quick check on the internet, boy am I glad I did.
Thanks Jeremy, that was so easy.

Bryan
July 2012

Just fixed it, Thanks!!!

Anthony Morgan
June 2012

Same Blue transistor placed under the logo under front bottom panel. 4 simple screws and placed the peg back in the hole. Tada! Fixed and it was close to being taken to the curb. Sure am thankful for whoever offered the fix.
Must have been the kids jumping on the front.
Dealer told me the console was $239 and the power board was $99 which did not include the service call or labor.

Jay K
March 2012

that little blue tower under the image symbol was my problem. i moved it just a bit and it worked. thank you i was just ready to throw my treadmill away and get a new one. now this one works just fine.

auctionhouse
March 2012

Unbelievable! I'm trying to pin point the cause since a couple of days, studying the wire diagrams and diagnostics provided in the drive system compartment. I did not expect the issue on the power control board, but indeed, the big capacitor was the issue. Wiggled it, and sure enough, it works!

Theo
January 2012

Love you guys! My treadmill hasn't worked for a year. I was pulling it out to "trash it" and thought I would look online to see if anyone else had the same problem first. THANK GOD I DID. Works like new! My daughter will be very excited! THANKS so much!

Mary
February 2011

The blue little barrel was not making full contact. I just plugged it back on and secured it with some electrical tape to make sure it didn't fall again and it works fine now. Thanks Jeremy!!!

Angie
January 2011

Jeremy very awesome!!! Thank you very much!!! You have saved me SOOO much money!!! My son was amazed how I found the answer on the internet and how silly the solution was. :)

Heather
February 2010

Just fixed it, thanks for the answer Jeremy.

Errol
January 2010

OMG, it worked. Thank You

Mark
January 2010

I love the internet! Just fixed it.

haystacknat
December 2009

My treadmill had the same problem. Under the Plastic panel with the Image 10.0 logo that covers the motor there is a little blue (about .75" diameter and 1" long)barrel-shaped electronic component. It attaches to the circuit board with two pins. What must have happened is that my kids stepped on that panel and bent that component down and one pin came out of the circuit board. I reinserted both pins on the bottom of that barrel into the circuit board and it works good as new. Took me about 3 minutes to repair. Hope this helps.

Jeremy
November 2009

I found an answer! While i turned it on, it was making that buzzing noise when i accidently stepped on the part with the Image 10.0 logo. It made a big thump and the system reset or something and works like normal. Works every time!

Chris
June 2009

I had the same problem and left it untouched for two weeks. Yesterday, my child plugged in the key and it just worked normally.

Paul
March 2009

I have exactly the same problem. Any suggestions?

Paul
March 2009

I am having the same problem. New Console is out of stock and probably not worth replacing. Anyone else solved this issue?

John
March 2009