T80si has stopped working. The heater can has 4 terminal poles sticking out of the top of it. When viewed in the wall mounted postion the rear right terminal pole has a thick brown wire leading from it. This wire where it connects to the terminal pole is burnt (as if it has shorted out). The MCB on the distribution board did not trip.
The shower is totally dead.
The shower is about 3-4 years old and is a 9.5kw heater can.
Water is coming through the overflow pipe in the unit. when the heat switch is turned on hot almost fully the overflow pipe does not leak but comes out the hose,the shower head has been removed, please can you advise. It's a triton 80r. Thanks RIck
Rick rykala
July 2015
same has happened to mine, but it is the front blue wire that is burning...
DSM
November 2008
I've found Triton themselves very helpful. Try their fault finding service at http://www.tritonshowers.co.uk/wps/wcm/connect/TritonShowers/Internet/After+Sales+Service/Fault+Diagnosis/Shower+Doctor/
Tony
October 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.