Hi Paz, I agree with longjohn.Shine a torch inside when you turn it on and you will more than likely see the water spraying from the top motor hose. You cannot get this as a part so you have to replace the complete motor assy and fixing kit. All the best.
FOXY
October 2008
F2 fault means water has leaked into the bottom base tray of machine and activated flood switch float. May trip power because plug connector to motor can be sitting in water. You need to empty the water from the base and let it dry (disconnect from power, remove lower front panel so you can clean out water). Then set machine going to see where it has leaked from
longjohn
October 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dishwashers.