cooker transfers please?

My Diplomat 1100DFa works fine. I've already replaced the fascia once - it's quite an easy DIY job, but can no longer find the spare listed. Obviously a lot of us would like help so can't someone manufacture this spare.

Ann
February 2012

I'm having the same problem. Can anyone help with transfers or pictures of what they should look like?

Thanks

Nicola
April 2011

I've just moved into a rented house with this oven and the control panel is completely blank...

Did anyone here get it sorted? I've looked in the 2 manuals I have but can't even see a picture of what it should look like. If someone has anything that might help I'd be very very grateful!

Thanks

Lisa
January 2011

control panel fascia for diplomat cooker 1100DFa

NEED HELP PLEASE !!!

The panel details have faded ?

Noticed Iain October 2009 made his own ,could Iain or in deed any body sell me the Transfers ?

Pete
October 2010

Have either of you still got the scanned images which you could send me? As I am having the same trouble:-)

Karen
April 2010

Hi Iain & Mick

Have either of you still got the scanned images which you could send me? My booklet also dosn't have any images.

Thanks!

Ren
April 2010

Hi Iain, have you still got the scanned images you used to make your decals? Our booklet hasn't got any images.

Mick
December 2009

Had the same problem - you can't buy transfers from the oven maker but you can make your own - I bought laser Water Transfer decal paper (£13 for 10 sheets of A4 clear) - made up my dials in powerpoint (test print them for fit, layout etc on normal paper) then printed them on the decal paper and put them on the facia (ensure clean before application). A good start is to scan your instruction book (it has the original dials in it). Let them dry fully. Mine went on 8 months ago and still there (onto stainless steel). A little work and only a tenner in cost ... forget getting new facia that's probably what they want :)

Iain
October 2009

Hi Julia, you cannot purchase the transfers, they are put on the panel by the manufacturers.You have to have a new control panel fitted but they are very expensive.All the best.

FOXY
September 2008